Enkei ST6 wheels

[WormGod]

Yep, RT6 is a 0 offset. And with 285/60, you will trim a considerable amount. To avoid it, the 20mm will tuck it within a minimal trim pocket.

IIRC, my centerbore (18x8.5) is 108. The debate whether we are actually 100 or 108 is up for others while I just sit and back accept my happiness with what I have, heh. You should be fine as long as you don't stray too far from that range (under 100 probably not so good, higher, consider hubcentric rings).

[Y33TREKker]

The 20mm offest you mentioned. Is that +20 or -20?

[XtonVX]

Gary, did you have to do any trimming other than the front cladding with your RT6's? Also, can you confirm that your VX is not lifted? Thanks.