For anyone who purchased Jo's skid plates.

[Y33TREKker]

Yes Jo, I was aware these plates were sold "As-is". It's not like I was asking for a refund in my post/thread.

But building on Jo's comments, along with any overall modifications/trimming for making these fiberglass plates fit, did anyone find it necessary to remove the front bumper cover to make use of it's non-mounted flexibility to initially get the front plate into place?

Still deciding on whether to modify the front and rear fiberglass plates I purchased more, or simply sell them to someone else looking for that sort of project.

This set had some internal cracks that I've already had repaired by a local body shop, so they're ready to be primed and finished. It's simply the relative ease of fitment that's going to be guesswork at this point.

For now though, the question above (in bold) is what I'd appreciate further feedback on.

[JoFotoz]

I'm not sure how you arrive at the "refund" part of your reply!!??

I was in no way suggesting you were.. !!

I was simply confirming..given you purchased the plates from a 3rd party..
...not from me..
...that you were aware of the "as is" from mold parameters.

And that fitting and finishing was required.

As for the "internal cracks".. they certainly were not sent out with defects..
..and if they arrived at the initial buyer with said defects I would of course have rectified the situation.

Jo

[tpunk]

I'm guessing these aren't being sold anymore either right?

[JoFotoz]

The F/glass batch I made all sold out...

I'm guessing these aren't being sold anymore either right?

It looks like Rudy is going to produce the ABS ones again ..
..with updated hitch cut out, and matching side plates

The originals he did were VERY good... just like OEM ..
...and I'm sure the next ones he does will be just as good

Go here :-

http://www.vehicross.info/forums/showthread.php?t=26446

Cheers

Jo

[Y33TREKker]

I'm guessing these aren't being sold anymore either right?

I have a set that will soon be available.

As Jo has said, final fit and trimming may be necessary depending on your specific VX since front bumper covers seem to vary (the fitment of these specific plates to my specific VX simply isn't close enough for my personal preference), but these have no current issues and are now ready to be primed and painted.

I will be out of town later this week, so if you're interested, the earliest I'd be able to ship would be next week.

If interested, just shoot me a PM.

[Y33TREKker]

I'm not sure how you arrive at the "refund" part of your reply!!??

I was in no way suggesting you were.. !!

I was simply confirming..given you purchased the plates from a 3rd party..
...not from me..
...that you were aware of the "as is" from mold parameters.

And that fitting and finishing was required.

As for the "internal cracks".. they certainly were not sent out with defects..
..and if they arrived at the initial buyer with said defects I would of course have rectified the situation.

Jo

And as I said, I was already aware the plates were sold "as-is", which made me have to question why you felt the need to bring it up again.

[JoFotoz]

PLEASE..dont get offended...BUT, I'm not psychic Trekker...

And as I said, I was already aware the plates were sold "as-is", which made me have to question why you felt the need to bring it up again.

Your INITIAL post ( the one I replied to... ! ) made NO mention that you were aware of the "as is" from mold stipulation,
and that they required fitting and finishing....and given you purchased them from a 3rd party...I elaborated.


How about we solve the issue..rather than have this devolve into another bicker fest .

You have a PM from me in reply to yours..


jo

[Y33TREKker]

PLEASE..dont get offended...BUT, I'm not psychic Trekker...

I suppose this is your idea of not making things any worse?

Your INITIAL post ( the one I replied to... ! ) made NO mention that you were aware of the "as is" from mold stipulation,
and that they required fitting and finishing....and given you purchased them from a 3rd party...I elaborated.

How about we solve the issue..rather than have this devolve into another bicker fest .

You have a PM from me in reply to yours..

jo

Was your PM, and this latest comment, where you basically implied in both that I was trying to start another bicker fest really supposed to have helped solve the issue Jo?

Has it not occurred to you that you really did nothing in this thread initially but get defensive and feel the need to add your disclaimer?

If you actually have information to add regarding first hand experience that can be utilized for achieving proper fitment, then by all means chime in. If not, please refrain from posting in my thread.

[JoFotoz]

My pleasure...

please refrain from posting in my thread.

Given the tone and content of PM you sent, please consider this Over & Out

Jo

[Y33TREKker]

My pleasure...


Given the tone and content of PM you sent, please consider this Over & Out

Jo

To say nothing of the tone and content of the PM YOU sent Jo.

Nice of you to once again try to publicly make me appear unreasonable while trying to make yourself appear totally innocent of any instaigation though.

The thing is, I remember long ago suggesting that some of you familiarize yourselves with the term self-fulfilling prophecy, but it seems obvious some of you never did. Some of you accuse me of being the sole cause of threads I participate in going awry, but at the same time you overlook the instigating remarks you yourselves (VXObsession, Bartman, and "others" as examples in this thread) make to try to take the thread in that direction and then absolve yourselves of any responsibility for those threads going awry.

Again.