VXC Products survey...

[ron]

I will look for your skid plate on a VX in Moab, if I like it and get my order in before the 15th can I get it right out of the mold with just a little trimming but no sanding or priming done to it? I am thinking about just doing a textured clear only with no paint or primer but I am not sure so I would like to get it in raw form so I can decide after I get it.

I can send it raw. I'll cut most of the flash material off close to the edges and pre-drill the holes for you. You can apply whatever finish you like afterwards. Let me know if you decide to order or not. Thanks. Rudy

[ron]

Just a friendly reminder that the deadline to purchase the rear plate at the current sale price is this Friday, May 15th. Please go to link if interested:

http://www.vehicross.info/forums/sho...8&postcount=62

Thanks. rudy

[CatFish]

I can send it raw. I'll cut most of the flash material off close to the edges and pre-drill the holes for you. You can apply whatever finish you like afterwards. Let me know if you decide to order or not. Thanks. Rudy

I will order one from you but your order form just has 3 choices

PRIMERED REAR SKIDPLATE (NON-HITCHED) $225.00

PRIMERED REAR SKIDPLATE (TONE MONDAY HITCH) N/A

OEM PAINT W/ CLEARCOAT SERVICE OPTION $100.00

I would like it raw, it might be good to trim the excess and sand the seam so it fits in your shipping container and so I do not have a lot of trimming to do, I just do not want the texture sanded off or any paint or primer on it. Just let me know how I order it so it does not come sanded and primed.

Thanks,
Chris

[ron]

I will order one from you but your order form just has 3 choices

PRIMERED REAR SKIDPLATE (NON-HITCHED) $225.00

PRIMERED REAR SKIDPLATE (TONE MONDAY HITCH) N/A

OEM PAINT W/ CLEARCOAT SERVICE OPTION $100.00

I would like it raw, it might be good to trim the excess and sand the seam so it fits in your shipping container and so I do not have a lot of trimming to do, I just do not want the texture sanded off or any paint or primer on it. Just let me know how I order it so it does not come sanded and primed.

Thanks,
Chris

hi Chris...

I have about 5 rear plates left in stock. All have been trimmed with the edges sanded. But, I left the textured surface and unprimed and unpainted til I get an order. I sell to you for $225 for unprimed and unpainted including shipping. Give me your PayPal e-mail address and I can send you an invoice. Thanks and let me know if you have any questions. rudy