ABS Front skidplate
ABS Rear skidplate
ABS Side skidplates
Old Shifterplate set
New Shifterplate set
Grill Inserts (plastic)
Grill inserts (stainless steel)
Mud Guard set
Front clear lens set
For custom VehiCross skidplates and accessories, check out:
www.aftershockproducts.com
Just a friendly reminder that the deadline to purchase the rear plate at the current sale price is this Friday, May 15th. Please go to link if interested:
http://www.vehicross.info/forums/sho...8&postcount=62
Thanks. rudy
I will order one from you but your order form just has 3 choices
PRIMERED REAR SKIDPLATE (NON-HITCHED) $225.00
PRIMERED REAR SKIDPLATE (TONE MONDAY HITCH) N/A
OEM PAINT W/ CLEARCOAT SERVICE OPTION $100.00
I would like it raw, it might be good to trim the excess and sand the seam so it fits in your shipping container and so I do not have a lot of trimming to do, I just do not want the texture sanded off or any paint or primer on it. Just let me know how I order it so it does not come sanded and primed.
Thanks,
Chris
hi Chris...
I have about 5 rear plates left in stock. All have been trimmed with the edges sanded. But, I left the textured surface and unprimed and unpainted til I get an order. I sell to you for $225 for unprimed and unpainted including shipping. Give me your PayPal e-mail address and I can send you an invoice. Thanks and let me know if you have any questions. rudy
Thks!!! Ron. Ordered mine!!!
http://aftershockproducts.com/#/vx-r...ate/4589197405
Reminder: tomorrow is the last day to order the rear plate at sale price. If you decide to include the paint option, make sure you include year of your vx and color in the PayPal comments box during transaction. Let me know if you have any q's. Thanks. Rudy
01 VX Kaiser | Love it! Drive it! Mod it! MYVEHICROSS.com | VX-WIKI
Rancho RS9000X | VXC Shifter Plates | PV2 | Hella Micro DE fogs | Carbon Fiber Hood | AfterShock Skid Plates (front, rear, sides)
Today's the last day to purchase the rear plate at current sale price! Price goes back up tomorrow. If you're on the fence in purchasing, please do it now as this WILL help fund the development for the front plate which is next on deck. Let me know if you have any questions. Thanks. rudy
Link:
http://aftershockproducts.com/#/vx-r...ate/4589197405
A couple of rear plates (painted proton and primered) shipped out today. I still have a few left from the first batch order of 10. Once all are gone, it may be a while before I order another batch. If interested in buying one for yours, click on the following link:
http://aftershockproducts.com/#/vx-r...ate/4589197405
![]()
That looks sweet. Outstanding job! Thanks my kid's "BUMBLEBEE" will be happy.
How does it look Rudy? Thanks! Ray.
Like to mention that I have about 5 more rear plates ready for paint and available for purchase. After these 5 are done, not sure when I'll make another batch order as I'm still trying to save for the front plate mold to be fabricated. Let me know if you have any questions. Thanks. rudy
Hi Ron,
What is the recommended hardware to get these attached? I did a few searches in the forums and didn't seem to find anything from the past.
The plate will come with hardware (stainless steel replacement screws) and install instructions. Basically, utilizes the bottom oem cladding screw locations. Mostly this method will suffice to secure the plate to the cladding. However, because cladding differs from one to the next, you can replace the top cosmetic screws with self taps. I just replaced the top two outter corner ones as the corners were lifted and this gives it a cleaner flushed look. Others have replaced all of the cosmetic screws all together. Hope this helps.