VXC Products survey...

[JULIAN911]

I have had Ron's front & read skid plates for 10 years and been offroading 4-5times with the Austin group. Plates still look good as new... I will definitely buy from Ron's creations again!

[tom4bren]

... the skid plates I picked up from a past VX owner in Ohio awhile back had stress fractures throughout the mold that I'm having to have addressed by my bodywork dude, so very doubtful I'd go back to the same origin for any side plates even if they were being offered.

Why not just get them LineX'd. Since they are subject to damage because of where they are mounted, seems like an elegant solution. LineX would even fill in the fractures you already have so they won't spread. Your body work dude will be able to hide them but not keep them from getting worse.

[sean_grigoros]

I would like to order, please let me know when you are ready to sell. Thanks

[sean_grigoros]

Oh would like to order front, rear skid plate, side skid plate and both shift plate. Please email me at sean_grigoros@hotmail.com for quote. Thanks

[ron]

UPDATE:

Finished the rear skidplate mold with both the REDESIGNED 'hitched' and 'non-hitched' plugs last week. Planning to bring in the mold to the local vacuum-formers to get some prices. Once that gets settled out, then I'll offer the rear plate for sale.

[img][/img]

[img][/img]

[img][/img]

[img][/img]

[yellowgizmo99]

is that 40# foam you are using?

[ron]

is that 40# foam you are using?

Yes, 40# modulan. Used same material for previous rear skidplate mold years ago. Will probably do the same with the side plates on deck.

[JoFotoz]

Love that stuff

I'm using similar 16# right now for filling voids and sculpting front edges of the Vx trailer.

Not cheap..but its good

Jo

[ron]

Love that stuff

I'm using similar 16# right now for filling voids and sculpting front edges of the Vx trailer.

Not cheap..but its good

Jo

@ Jo...Yeah i usually work with 7-10 # yellow foam for quick mockups here at work.

@ everyone else...the rear plate mold was dropped off this morning at the local vacuum formers. He's going to pull both the hitched and non-hitched versions. When i receive the parts, I'll clean them up and test fit the non-hitched version on my vx (since I have a standard hitch installed). But, will need someone (local preferred, but not necessary) who has a Tone Monday hitch to test fit the other. If all things go well, I'll offer these first two at a discount.

[Mile High VX]

I have a Tone hitch if you don't find someone local.

[EVO]

Oooooh!!! Let us know when you're ready!! Thanks Ron!!

[ron]

[ron]

Test fit for the non-hitched version of the rear plate is good. NOTE: Since the cladding and skidplates can vary from one vx to another, adding additional mounting screws to secure the top edge of the plate directly to the cladding will give you a uniform flushed fit. Since it's constructed out of ABS plastic, the plate is pliable enough to conform to the shape of the bumper. In my previous (Ebony) vx, I never had to use additional screws on the top edge. However, with this recent (Ivory) one, I added two additional screws on the outter top corners replacing two of the cosmetic screws on outter left and right. This resulted in a clean tight fit of the plate to the cladding bumper. I'll have a better explanation on the installation instructions in detail.

I'll be sending out the hitched version for a test fit to a fellow vxer soon. Mile High, you have a pm.

Final prices for the NON-hitched version are as follows:

-$225 primered only
ADD $85 for paint + clearcoat (OEM)
Installation hardware all included. Actual shipping is TBD.
PM me if you're interested in buying.

Once I get confirmation of fitment for the 'hitched' version (Tone Monday hitch), I'll be offering that up for sale afterwards.

After I do more hand finish work, I'll be selling this first NON-hitched version as is for $190. If you need it finished and painted OEM, add another $85. Let me know if you're interested.





Hitched (Tone Monday) version on the left and NON-hitched version (sandblasted) on the right:

[Mile High VX]

I'll be sending out the hitched version for a test fit to a fellow vxer soon. Mile High, you have a pm.

You have two back...

[CatFish]

It looks like they are black and textured out of the mold or did you make the hitched one textured and black?