Front Running Lights

[VX KAT]

Yeah, and I was running Vision X Solstice Solo Prime LED pods so they stayed cool enough.

[MSHardeman]

I did something like this, but I just installed some HID fog lights with angel eye rings around them. Following Moncha's lead on his installation of the Hella Micro-DE lights http://www.vehicross.info/modules.ph...ewarticle&id=2 , I just used flat stock aluminum and bent it into a square U-shape and cut some slots in the long sides of the "U" (for adjustability) to mount the fog lights. I DID mount it to the top of the turn signal housing because it's a VERY sturdy piece of plastic. I painted everything black to make it disappear and it's been working well for a few years now.

I have some pictures of the install at home, and I'd be happy to post them if it would help anyone.

CB, to your point; I did remove the stock running lights and I did cut out the mounting flanges for them in order to get the new fog lights in so I really can't go backwards from here. Moncha's DE install did NOT remove the mounting flanges so maybe take a look at that as an option if you can't, don't want to, hack up the stock running lights or their mounting locations.

[Knigh7s]

If you look really closely, you will find "NISSAN" embossed on inside of the lens. Its usually covered by a checkered light grey print. They can be found on the Silvia (180sx), but you would be better off finding someone that is parting with the VX version as the 180sx comes with the grill pieces.

VX Part Numbers:
Right: 8-97207-191-0
Left: 8-97207-192-0

180sx Part Numbers:
Right: B6130-60F00
Left: B6135-60F00
More info