Results 1 to 7 of 7

Thread: S/c on a standard inlet manifold

  1. #1
    Member Since
    Nov 2013
    Location
    1999,silver,vehicross, 1394
    Posts
    25
    Thanked: 0

    S/c on a standard inlet manifold

    Hello!
    This is my project- VXer with s/c Magnuson MP90, 4 generation.

    The analysis compartment showed that a large part of the need for installation of compressor parts are already under the hood of our cars...

    The most important item is the intake manifold. It all started... the Whole reservoir was built on the basis of regular intake.

    Compressor drive really wanted to do from the regular belt without any extra pulleys, but the long drive shaft of the compressor defined another design, we had to go by way of Alpine...
    At the moment all systems are working normally, no errors.
    The car of course is not to learn, it is very pleasant to feel the extra power!
    Had to re-adjust to the dynamics of the machine, especially in the city.
    Now I understand all those who have spared no expense in these regulations!
    I hope that my experience will be useful to those who decide to repeat this work.
    The next step I would like to tweak the engine control unit, and to implement the collector tubes Luminova, which is already waiting for their turn, it will be very useful to keep the temperature of the charge air within reasonable limits


    The Russia forum, with image:
    http://forum4x4club.ru/index.php?sho...=138777&page=9

  2. #2
    Member Since
    Nov 2012
    Location
    1999, Blue (Astral)5 spd VX #1396 ; '01 Proton 0753
    Posts
    775
    Thanked: 3
    Wow! Very nicely done! I'll link a few of the pictures here. And in the linked thread he states that the project cost him about $2k.





    There's no 'I' in denial.

  3. #3
    Member Since
    Nov 2013
    Location
    1999,silver,vehicross, 1394
    Posts
    25
    Thanked: 0
    BartmanS4 thanks to the photo!!! ;-)

  4. #4
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, #0580
    Posts
    1,887
    Thanked: 5
    Awesome!
    John Eaton
    Original Owner
    2001 Proton Yellow #580
    Atlanta GA

    http://wildtoys.com/vehicross/
    http://vehicross.blogspot.com/

    "Metaphors be with you"

  5. #5
    Member Since
    Jun 2002
    Location
    2001 Ebony S/C #1304
    Posts
    3,647
    Thanked: 10
    Bravo!
    Gary Noonan
    '01 S/C VX / '18 Forester XT

  6. #6
    Member Since
    Jan 2013
    Location
    2001,custom,#0947
    Posts
    329
    Thanked: 0
    nice !!!!!! were u able to install the cruise controll on it?

  7. #7
    Member Since
    Nov 2013
    Location
    1999,silver,vehicross, 1394
    Posts
    25
    Thanked: 0
    Thank you! Place under the cable cruise control prepared, you only need to install it.

Similar Threads

  1. Water under inlet manifold
    By Paul_A in forum VX Troubleshooting...
    Replies: 12
    Last Post: 12/21/2017, 12:59 PM
  2. Inlet manifold for the instaling supercharger and laminova cores. For sale!
    By NikitaKoval in forum Miscellaneous Items For Sale
    Replies: 5
    Last Post: 05/09/2017, 01:18 PM
  3. Standard Swap Questions
    By PPinzino in forum VX Talk...
    Replies: 7
    Last Post: 04/14/2014, 05:14 AM
  4. Manifold Snapped
    By iyafyl in forum VX Troubleshooting...
    Replies: 11
    Last Post: 01/13/2014, 11:20 AM
  5. Manifold Problems
    By Pens in forum VX Talk...
    Replies: 7
    Last Post: 02/21/2004, 04:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails