Is the K&N you installed a dry filter or oiled?
The reason I ask is that I recall some members who had them installed actually removing them later because the oil was fouling their MAF.
Also check all of your tranny mounts. Mine never worked loose but I recall some found theirs loose or missing.
I assume that you used gear oil with LSD additive in the rear pumpkin ... that's important.
When you replaced your window regulator, were the plastic tabs holding the glass to the regulator in good shape. There's a member who sells metal replacement brackets that help a lot with the tilting issue. You can also use the search function to find some threads on widening your window channels to help with that as well (probably won't show up for a while with your new regulators but it probably will eventually since you had to replace them).
Reply With Quote