So far I've....

[Mile High VX]

made some vehicross logos for the sides. The factory logos were halfway removed so that it only said Ross... used the counter strike font and mass the logo 8" long, I think it looks pretty clean and the flat black matches the car better imo

Photos?

Welcome to the addiction...

[JoFotoz]

Keep checking your oil consumption at every fill up...

...until you get a feel for its appetite !

And appetite will vary between freeway and town use too.

Jo

[tom4bren]

Is the K&N you installed a dry filter or oiled?

The reason I ask is that I recall some members who had them installed actually removing them later because the oil was fouling their MAF.

Also check all of your tranny mounts. Mine never worked loose but I recall some found theirs loose or missing.

I assume that you used gear oil with LSD additive in the rear pumpkin ... that's important.

When you replaced your window regulator, were the plastic tabs holding the glass to the regulator in good shape. There's a member who sells metal replacement brackets that help a lot with the tilting issue. You can also use the search function to find some threads on widening your window channels to help with that as well (probably won't show up for a while with your new regulators but it probably will eventually since you had to replace them).