Lifted VX or agressive looking tires...with stock 18" Rims

[tom4bren]

I think Iam going to go to the 913 Ome springs and the terra trail grapplers 285/65-18.....they are 33"

....and how many turns do I have to do approximately in the front?....

By the way, what is flip ball joint? Do I need for this? Or HD torsion?

Are you sure that those tires aren't too wide for OEM rims? May want to check with your local tire shop before you order them. IIRC the rule of thumb is that tire width should not exceed the rim width by more than 2".

4 complete turns of the Torsion Bar adjustment bolt for each inch of lift.

Ball joint flip isn't needed for the lift but may help out with alignment after the lift. If your alignment shop has a problem then do the flip ... otherwise, leave it alone.

Here's the link for 913's @ Independent 4x but Rocky Road also carries them: http://www.independent4x.com/Isuzu-O...gs-_p_132.html