CV Axle replacement

[PK]

You have to clean the grease out first, so that you can see the ring.
Look all around for the join, and lift up one end with a small screwdriver.
Once you have it started the rest just flips out.

PK

[nfpgasmask]

I use a pick, comes right out. Or you can use a tiny screwdriver to lift it up.

Look here at CV SNAP RING AND CIRCLIP. Its the big circular ring.


It will also help to push the CV in to give you room to pull out the circlip. When you are pulling it out, it will be harder to get at the ring. You can cleanout the grease to help see it, but you really don't need to, you can just fish it out with a curled pick if you have one.

HTH,

Bart