Remove tweeter cover (1 screw behind little disc), door handle cover (1 screw), window control panel (pops up & forward I think).

Pull door panel away from door (IIRC, there's about 8 of those clips to pull free). Harbor Freight sells a pretty slick tool for releasing those clips without breaking them.

Lift door panel up away from window track & release connectors for window & lock wiring from behind panel. Set door panel aside.

Gently release vapor barrier from door. It's glued all the way around. You'll probably tear it but it can be patched with duct or masking tape. If you tear it real bad, you can replace it with a large (heavy duty) trash bag.

I'm going from months old memory so someone chime in if'n I've forgotten anything.