Fiberglas Rear Skid Plate

[Mile High VX]

If your going to rattle can it, I might have the color code still.

I ordered a premixed rattle can from a place online that does touch up colors.

Your front plate is still holding up great, but I needed to refinish it due to the CO road rocks...

One can should be enough to do both and thanks for all the advice.

[rowhard]

[quote=Mile High VX;292859 Your front plate is still holding up great, but I needed to refinish it due to the CO road rocks...
[/quote]

pick up a tube of glazing putty, (fine body filler) to fill in the CO road rocks if they are small chips out of the finish. Apply thinly with a a plastic spreader, sand with some 320 dry, prime then wet sand with 4 or 600 grit and it will be perfect for painting.