Fiberglas Rear Skid Plate

[VX KAT]

Here's a thread I did on fitting mine:
http://www.vehicross.info/forums/sho...kid+plate+50mm

Had to use a C-clamp vice grips to pull the plate into alignment with the cladding holes. I used 45mm and 50mm bolts, but it turned out I could have gone with shorter ones after the vice grips pulled it into closer alignment.
I used neoprene washers as protector between metal washer and painted plate. (See last pic)


The links in that thread are dead, so here's the pics.

First pic is to show the detail on the fake studs.



FRONT PLATE:
















Here's the REAR SKID fitted:








Back of rear plate: