Quote Originally Posted by tom4bren View Post
The TOD uses electric clutches to pulse power to the front when needed. It won't lock in the front drive train continuouslly so it's OK on dry pavement. I'm not sure how the other full timers do it (probably clutches or viscous coupling). The TOD senses both wheel spin and engine torque when it decides to send power up front. So on your test drive, don't take it easy on the skinny pedal. I wouldn't worry too much about what the TOD lights mean ... just that there's activity on the display when you punch it.

BTW, the rear is posi so you'll get pretty good traction even if the front drive isn't working. I put locking hubs on mine & can't remember the last time I locked them.

BTW, if you're looking for the VX to be an economical DD to replace the Avalanche ... think again. You'll probably only get 15-17 mpg in it. I drive 100 miles a day so the VX stays at home on work days.
MPG isn't a worry, it's the mileage I'm putting on the Avy that worries me. I've had more things go wrong on that truck over the last 30k miles than I thought possible (ABS sensor, ABS pump, right front wheel bearing, left front hub assembly, O2 sensor, 2 exhausts, left rear caliper, right rear brake assembly, etc...and I still have no AC and heat only if the truck is in a good mood) so it's not bad to let it sit a couple days a week. 15 MPG doesn't bother me...no fun things in life get good MPG Except maybe a Tesla or a 'Vette in 6th on the highway



Quote Originally Posted by MSHardeman View Post
Yeah, what Tom said about the TOD (Torque On Demand) system. It is considered an all wheel drive system.

One other thing to look at (and this isn't a deal breaker) is the front bumper on the VX. It is a tube that is hidden behind the front cladding and you can easily see it (if it's there) by looking into the front wheel well in front of the front tire. The bumpers are notorious for completely rotting away. Many people know that there's are gone and drive on, some probably don't know that it's missing and continue to drive. It does nothing for the performance of the VX but would provide some (VERY minimal) front end protection in a crash.
Replacing the bumper beam isn't a problem! I can handle that easily. Have a full machine shop at work to do whatever I need.



Quote Originally Posted by VX KAT View Post
A few years ago, several of us put together a pretty detailed "checklist", with many items being very specific to the VX. It's NOT all inclusive, but it's a good place to start, just pick and choose what you want from it. (for example, the front bumper bar rusting out is on there, which Mark just mentioned).

http://www.vehicross.info/forums/sho...9&postcount=10

Thanks for the link! Will read up on it tomorrow after tonight's festivities...