YAH! Another cut bump stops in half or remove 'em completely convert!
Dramatically reduces that slamming effect at the back end. I think there's at least 10 of us that have done it now.
Super VXer
YAH! Another cut bump stops in half or remove 'em completely convert!
Dramatically reduces that slamming effect at the back end. I think there's at least 10 of us that have done it now.
VX KAT
....the adventure BEGINS ANEW! ...2015......
Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.
Super VXer
Are the spring helpers the figure 8 type rubber things?
I have now had the Vredestien Wintrac 4 winter tyres fitted and they must have a stiffer wall than the very cheap Runway tyres that were on the VX. As I have noticed at 2 bar tyre pressure the ride was a bit harder so I have now set the Rancho's at 7 which produces a nicer ride.
Super VXer
Yes, the black rubber figure eight. Just unbolt them, take a saw to the middle to cut them in half. I gained at least 4" clearance.Originally Posted by David Wiltshire
Here's a before/after. Can see it was virtually sitting ON the axle, maybe 1/4" off.
Posting Permissions
Reply With Quote
