Interesting oil consumption issue

[evillecutter]

pcv valve is most likely the cause.plug the hose going to the intake and put a small valve cover breather where the pcv valve goes and solve the problem. mine ate 2 qts in 1000 miles did this and back to 1/2 to 1 qt in 3000. trust me it works.

i have been cleaning my pcv with carb cleaner about every 3 days and i havent lost any oil yet - first time since ive owned it that it didnt need to be topped off after a couple weeks - ive cleaned it after every oil change and i change the oil religiously but i honestly think this is helping and might soon consider the tiny breather if it can eliminate the need for me to keep cleaning the pcv

[tom4bren]

There's lots of threads on the subject. Use the Search function with "Oil Breather" & you'll find them.

The one point that seems important (but was only mentioned once) is that if you put a breather where the PCV is, make sure you cap off the hose that connected to the other side of the PCV.

Another little factoid (question actually) is that the PCV only vents one of the valve covers. Shouldn't both be vented to ensure that the pressure is balanced? Is there a cross over that makes that happen? What about etlsports find of a oil filler cap/vent/filter replacement for that side ... would that be a good idea if replacing the PCV with a filter/vent?

[evillecutter]

There's lots of threads on the subject. Use the Search function with "Oil Breather" & you'll find them.

The one point that seems important (but was only mentioned once) is that if you put a breather where the PCV is, make sure you cap off the hose that connected to the other side of the PCV.

Another little factoid (question actually) is that the PCV only vents one of the valve covers. Shouldn't both be vented to ensure that the pressure is balanced? Is there a cross over that makes that happen? What about etlsports find of a oil filler cap/vent/filter replacement for that side ... would that be a good idea if replacing the PCV with a filter/vent?

all very good questions - anyone ever find a breathing oil cap that will fit a vx? im seriously considering the pcv breather to start with - worst case scenerio i take it off and go back to cleaning the pcv every few days