Hood Drain Tubes Installation

[IndianaVX]

Tyler, email with pics sent

[tysamigo]

Here is what I'm looking at. You should be able to see the new stainless bolts holding in the hood insert, as i cut holes out of the DynaLiner for those areas.



From this pic, can anyone tell me where the OTHER END of the drain tube goes? I know it goes into one of the grooves in the hood and then drains out along a pathway, but where does it insert?

When you are looking at the whole hood, there are basically 3 LARGE indentions in the hood. My finger is pointing to the left side of the BUMP that's in this area (for reference). From this point, in which direction do I go?

I don't want to start making to many blind cuts in the DynaLiner and Dynamat.

[Knigh7s]

Try that one, that should help a bit more. Don't forget, you will have to find that small hole on the frame and cut that open or you will get water pooling in the frame.

[tysamigo]

Try that one, that should help a bit more. Don't forget, you will have to find that small hole on the frame and cut that open or you will get water pooling in the frame.

Thank you VERY MUCH!

You and IndianaVX gave me exactly what I needed! Thank you VERY VERY MUCH GUYS, AWESOME!

PROBLEM SOLVED... now on to the next one ..


LOVE YA'LL MAN!!