My turn for LineX

[bartmanS4]

Marlin, you may want to trim the edges of the cladding a little first so that clearance won't be an issue. My does hang up a little on the rear door and the passenger door. On the rear door it's at the lower left corner where the tail light and cladding meet. The passenger door is where it meets the fender cladding. I would take a good look at every location the cladding moves against another cladding piece and make sure you have adequate clearance prior to removal and spraying.

[Marlin]

Thanks for the tip, I will trim them back a 1/4" or so all the way around. Hadn't thought of that.