Results 1 to 12 of 12

Thread: Intake leaking

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2011
    Location
    2000 proton yellow vx 0610
    Posts
    87
    Thanked: 0
    Quote Originally Posted by blacksambo View Post
    You have CEL code 172 etc. It's very common problem with the 6VE1 engine. No big deal to fix. Get new plenum gaskets and go to work removing the plenum. When you replace be careful not to over Torque the bolts. Hand tighten to 13lbs max. That's all. You'll be back in business in no time (allow 4 hours for labor).
    I assume you mean 13inch lbs correct? I am in the process of looking that info up now. And yes I did have the CEL codes 171-172 She is running pretty bad. I have been noticing that my gas milage has been getting worse for about the last month from 14 to 15 mpg's to 10-11mpg's and then one day I started it up and it went to 2000 rpm's and then back down and was running real rough. Thats when the light came on.

  2. #2
    Member Since
    Dec 2011
    Location
    2000 proton yellow vx 0610
    Posts
    87
    Thanked: 0
    Quote Originally Posted by kehecross View Post
    I assume you mean 13inch lbs correct? I am in the process of looking that info up now. And yes I did have the CEL codes 171-172 She is running pretty bad. I have been noticing that my gas milage has been getting worse for about the last month from 14 to 15 mpg's to 10-11mpg's and then one day I started it up and it went to 2000 rpm's and then back down and was running real rough. Thats when the light came on.
    I just found it in the shop manual it is 18 ft lbs

  3. #3
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0
    If I recall correctly, there was a TSB that changed it to 13 because 18 proved to be too much.
    SilverBullet75
    Formerly: '01 Ebony VXSTLTH
    Now: '08 Saab 9-7x Aero 6.0L

  4. #4
    Member Since
    Dec 2011
    Location
    2000 proton yellow vx 0610
    Posts
    87
    Thanked: 0
    Quote Originally Posted by SilverBullet75 View Post
    If I recall correctly, there was a TSB that changed it to 13 because 18 proved to be too much.
    Uh ok! Hey I just got back from Vegas. I was out there from wed to wed. We had a great time. The weather is much better out there then here.

  5. #5
    Member Since
    Feb 2004
    Location
    '01 Ebony #0830
    Posts
    1,097
    Thanked: 0

    Red face

    LOL. As they say, one man's junk is another man's treasure...
    I actually hate it here... but am stuck due to various reasons.
    I would LOVE to live in a climate with SEASONS!
    Allergies here are terrible too (right now in full effect).

    I miss rain!

    I hope you enjoyed stimulating our economy though!

  6. #6
    Member Since
    Dec 2011
    Location
    2000 proton yellow vx 0610
    Posts
    87
    Thanked: 0
    I did have trouble with the Allergies! But it sure was nice to get out of the cold wet and snowy weather for awhile. We did the Zip line down on Fremont Street tuesday. What a blast!! And yes they did get my money too, I guess they can't build those casino's on the winners. lol

  7. #7
    Member Since
    Dec 2011
    Location
    2000 proton yellow vx 0610
    Posts
    87
    Thanked: 0
    Well I tore into the intake job tonight. A little less then 2hrs intake is off Gasket was broke in 2 places on driver side. Order all the gaskets plus New pressure regulator, Serpentine belt, Spark plugs, EGR gasket and lots of carb cleaner. Might just as well get all done at one time. Not as bad as I thought it would be.

Similar Threads

  1. Something leaking...
    By cst2099 in forum VX Troubleshooting...
    Replies: 5
    Last Post: 01/01/2016, 05:22 PM
  2. My baby is leaking!
    By MeowMix in forum VX Troubleshooting...
    Replies: 27
    Last Post: 06/06/2011, 07:35 PM
  3. 3rd cylinder misfire = leaking intake manifold gasket
    By PHO2GR4 in forum VX Troubleshooting...
    Replies: 2
    Last Post: 12/30/2006, 12:28 PM
  4. Leaking Ironman
    By certz656 in forum VX Talk...
    Replies: 3
    Last Post: 10/15/2006, 05:33 PM
  5. Is something leaking?
    By kpaske in forum VX Troubleshooting...
    Replies: 5
    Last Post: 09/22/2003, 01:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails