Quote Originally Posted by RodL View Post
I am a new owner of a VX. Noticed in the video the TOD indicator showing single bars on the front. Is that the normal? I was hoping to see no power to front unless the road was slippery or the go pedal was mashed to the floor. Other than putting lock out hubs or a front drive disconnect is there a way to set rear drive only?

Sorry if I have hijacked, but it seems the OP question has been answered.
Yes, the transfer case will always split power to the front wheels after you get up to a certain rolling speed.

Manual hubs and the TOD off switch work well together. I will typically run 2WD in dry weather and notice a little smoother ride & 1-2 MPG increase.

Use the search function to research more info on the TOD off switch. The decision is split between it being a good or bad way to run the transfer case. I've personally used the off switch for a couple years without having any issues and would recommend it to anyone who is comfortable with 12V wiring.

http://www.vehicross.info/modules.ph...warticle&id=74