A couple years ago I stripped the threads on my grill's rotisserie motor, so they sent me a new motor and this counter weight. However, they didn't send any means to anchor it, except that threaded disk, that does not attach to my rod. I need to come up with some simple method to keep the weight secured to the rod so it doesn't slide (left/right,in/out) and also doesn't fall over when it reaches the top. I'll have it mounted inside the grill, so it will subjected to lots of heat, grease, etc. I have a lot of little hardware laying around, but thought I would open this up to the forum to think "outside the box", for some obviously simple method I haven't thought of yet. Your prize... all the turkey you want (white meat...I don't like it...pick-up only!)