OK I finally got to crawl under the VX and get the pic's. My driveway is not exactly flat or level. That being said I think that the difference from one side to the other is due to the tilt of my drive way. either way if you split the difference then I have gained 2 inches of lift from the spacers
It was actually the INSTALLED height of the coil spring that I needed.
3" suspension lift, shocks: Rancho 9000, tires 33"x11.5", wheels 16"x8", offset= 0, no front sway bar
Uh oh. Well I can get that as well, but the spring sits in the spacer a little more than the spring coil width. I will see if I can get a good picture tomorrow when the sun is up and I have better light.
Uh oh. Well I can get that as well, but the spring sits in the spacer a little more than the spring coil width. I will see if I can get a good picture tomorrow when the sun is up and I have better light.
Just need a measurement, picture is good too though.