New links are on! They come with new grade8 bolts (OEM were grade6). Not to hard of a job. Make sure you have 2 really big wrenchs...the binder nut is 2inchs (I used a 15" adjustable to hold the link and a 18" pipe wrench to tighten the 2" nut). FYI if one of these links lands on your face it hurts!
They only thing that made the install a bit harder is that my brackets that the links mount to had a few bends in them from rock contact.
OEM vs. Indy...




My links...slightly bent (I have straightened them a couple times)


The finished install