Hey guys,

So... I know that there have been people saying that it's not a good idea to install a "TOD-off" switch, and of course I felt like I just had to install it because my TOD was kicking on from the spare tire that I'm running on it while I wait for a new tire that matches the other 3 I have on it right now.

Well I guess I must have made a huge mistake and turned something that was slightly annoying to pretty concerning. I installed the TOD-off switch and noticed that, since then, my VX was running on just the rear wheels - which was fine by me because that's what I wanted - but I also didn't notice anything kicking in when I would push the switch button. So I decided to try shifting into 4L(while in neutral), heard a big ol clunk when I put it into drive, and could definitely hear all 4 wheels moving.

I put it back into 4-Hi and ever since then, I get a front end vibration when moving slowly(>5 mph) and a pretty loud and high pitched whine when moving at faster speeds. I also noticed that if I'm backing up and turning sharply, the VX will stop if I let my foot off the gas to coast backward... This is very concerning and I hope I didn't screw myself over by installing that TOD switch. I bypassed that switch and hooked up the wires so that the ECU was connected as normal and am still experiencing the same issues.

I've searched around the forum for a similar issue but can't find one. If anybody knows about this or knows a previous thread for the same issue, please let me know.

Thanks!