Quote Originally Posted by Maddawg View Post
Nice article. I was wondering how to get around the close to nothing clearance with the bump stop. I had considered removing and re-welding.
Many of us have cut the rear bump stops in half to reduce that hard slamming effect on rough roads, expansion joints in the road, potholes, etc... Takes it from about 1/2" clearance to about 4"....dramatically improved the slamming. Can always get a set from a salvage yard if you want to go back to stock. They're also still available new from Isuzu, about $45 each.

http://www.vehicross.info/forums/sho...ight=bump+stop


http://vehicross.info/forums/showthr...ght=bump+stops


http://vehicross.info/forums/showthr...ight=bumpstops


http://www.vehicross.info/forums/sho...spring+helpers