Quote Originally Posted by tom4bren View Post
Then you must have magic fingers. I don't know how you'd get the weatherstrip in place with the glass still engaged with the tracks. The window will still be in the track even in the lowest position.

Even if you can, it would probably be quicker & more easier to remove the glass since it's literally a matter of 2 bolts, tilt & slide out.

Of course, if your windows are tinted, you have to be much more careful on the 'slide out' part.

I'd cleaned the metal channel, and treated every square inch of the new rubber strip with 303 andput a little Silicone spray in the rubber track where the glass goes.
Then, with glass in place, I was able to feed the rubber strip down some, and then grab it from underneath and pull it down into place. I used the electric window to position the glass where it made it easiest to get the rubber strip where I wanted it. The window edge actually pushed the rubber right into place, worked great.

And you're right, the rubber strip is just held in by friction, no glue.

And watching Tim remove the glass when installing my SBC brackets made me quite sure neither Dave or I was gonna touch it! KISS!
(bet ya'll didn't know that last S stood for Sue did ya?)