headlight polycarbonate lens

[VX KAT]

Thanks folks for the good ideas. Problem is really the "inside" of the lens. Guess I'm going to have to try to tear the thing apart without managing to destroy my headlights in the process. I'll let you know how things turn out.

I know you're not trying to install projector lens or anything like that, but those threads I attached do show how they disassembled the lens. LittleBeast can probably give you real clear "How To" since he took his apart not too long ago. I recall reading you bake them in the oven for a while to soften the glue.

[pbkid]

Standard for taking apart headlights is in the oven for something like 350 for 10 minutes. (dont quote me on time or temp, google baking headlights).

[LittleBeast]

350 is too hot.

My quote from Anita's link:

"Locate an oven make sure that there is only one rack in oven and that it is on one of the lowest tracks in the oven. Test fit the cookie sheet/towel/1 headlight into your oven to make sure no metal is going to touch the headlight. Then turn your oven on and set the Temperature to 200 degrees exactly. Get a large cookie sheet, and cover the top of the cookie sheet with a damp towel. Then place your headlight onto the towel which is on top of the cookie sheet. Place headlight into oven and let it sit in there for 5 to 6 minutes. I would suggest wearing gloves from here on out. Remove cookie sheet and use a flat screwdriver and start slowly making your way around the headlight loosening the glue in between the clear plastic cover and the black plastic base of the headlight. Once you have gone all the way around once prying and turning the screwdriver start to pull the headlight apart with your hands. If you start to feel it coming loose keep going. If not place headlight back onto cookie sheet and place in oven for another 2 to 3 minutes, then try and pull apart again. Eventually it will break loose."