HD Torsion Bars: Independent4x.com

[RabidPony]

FWIW, the torsion bars don't bend, they twist. The spring rate comes from the actual twisting of the steel. That is why when we reindex them, we change how much "pretwist" we put on them, which if you are still stock, when you adjust the ride height by cranking the bolts, you are actually just twisting them a bit more, and that torsion is transferred to the front suspension and tries to push the tire down, in effect lifting the front end up Hence the loss of downtravel in the front suspension. We use that potential down travel to lift the front end higher.

What I really want are new rear lower links so I can get rid of my forward rake on the rear axle

Thanks for correcting that. Not sure what I was thinking when I typed it.

[SilverBullet75]

More updates:
I ended up lowering the front by an inch... WORLD of difference.

ABSOLUTELY LOVE THE RIDE OF THE HD TORSION BARS.

I went over a bunch of speed bumps today at maybe 8 mph... fump fump.
Not: BanG! Slam!

Lowering meant a little more cladding "adjustments"... but no biggie (33 in. tires)

My CV shaft angles are now horizontal, with the help of Joe Darlinton's 2 inch diff drops, and the 1 in. lowering.

It now has 38.5 rear height, and 37.5 front. (Ground to top of fender/wheel arch)

[BigSwede]

Stiffer torsion bars will help control the momentum of larger heavier tires on bumps and such.

I just received a set for my Trooper, in part to help carry the weight of the winch I'm about to install.

[SilverBullet75]

Just did my first freeway drive with the new torsion bars...

OMG... they are incredible. Every issue I had since I lifted is now fixed.
No more bump steer, very little nose-dive on braking, BETTER braking, floats over bumps instead of slamming, and it feels like a solid TRUCK now.
I've considered going back to stock height due to the previous ride-experience issues.... NOT ANY MORE!

Some may say that $500 is a lot to spend for these... I say, if you are lifted, this is THE best investment you can make for the comfort and control of your VX.

BigSwede and Buffy,
Please post your post-install experiences as well!
I'd love to hear your thoughts.

---JIM---

[Buffy]

I will report back next week on how the bars did. I have my next race this Saturday at Durhamtown Offroad park in Union Point, GA. This will be a very fast track from what I hear as part of the course is a trophy truck track with lots of jumps, steep descents, climbs, etc. Being this is just my second race I am shooting to finish before time expires and not break the truck. I now have a full roll cage installed, nothing like a little metal courage!!