ECORS Race VX

[rowhard]

that would do it,... but what I meant was anything you could do to strengthen the frame on your next VX racer

[Buffy]

Ah got it.... We plated the front section when we did the solid axle swap. I would plate the frame down the entire length. Most of the damage is passenger side. The body damage you see in the picture is from a previous race. I am still investigating what maybe damaged after this last race.i will have to get rid of the factory gas tank and go fuel cell. Was planing on doing that anyway just not this soon. Having lots of issues up front with the SAS. I have too much down travel and I am hitting the top of the axle and breaking my air line out. Also hammering out my bump stops. Will probably go to air bumps and will move the front axle about 1 1/2 inches forward to see of that helps with that. So tonight the gas tank comes out and a more complete inspection.

[Buffy]

The VX is feeling mighty tired after the race. I have lots of damage to fix. I had to cut the front axle back out and will have to completely remount it.



A nice shot showing the full hydro setup



Here is a shot of the switch panel that pretty muchs runs the truck