Quote Originally Posted by zadam123 View Post
I got it to go up but sometimes it works and sometimes not now it sounds like a grinding when working. Doea that narrow it down to one thing?

Thanks
Surprised you haven't heard about it...they're notorious for binding, sticking, jumping the track, tilting, burning up the motors.
There's literally hundreds of posts on the problem. It's probably THE #1 common problem.
Like circ said, a search on just "window fix" will pull up many, many threads on it.

When you have some time, here's a lonnnnnnggggggg list of threads that have good info and how to repair. You'll understand all the issues with them.


OK, don't freak out everybody, I just had to re-organize what I had on this topic, and add some to it.........and this particular thread just got unlucky enough to spur my motivation.....




















************************************************** ***************
PICTURES:


WINDOW GUIDE AT MIRROR.
FRONT WINDOW TRACK NOT ADJUSTABLE AT MIRROR (UPPER 1/3 OF TRACK)
BULLDOGGIE



THIS SHOWS THE WASHERS USED AS SPACERS INBETWEEN THE INSIDE DOOR FRAME AND THE LOWER WINDOW ARM TRACK (LOWER TRACK BOLTS) -
BULLDOGGIE



ARM TRACK UPPER SPACERS: SHOWS WASHERS ON THE TRACK MOUNT, NOTE HOW THE NYLON GUIDES ON THE ARM ARE NOT PULLING AWAY FROM THE TRACK AND THE CENTER OF THE ARM STAYS UNDER THE GLASS TO PUSH UP WHEN RAISING (NO PLYERS HOLDING THE ARM TO THE TRACK)
BULLDOGGIE










SBC BRACKETS & INSTALLATION:









WINDOW UNBOLTED FROM ARM, CLOSE UP LOOK AT HOW FAR THE ARM HOLE IS FROM THE WINDOW HOLE IN THE DOWN POSITION
BULLDOGGIE





BEFORE:
UPPER ARM BOLT HOLES WITH THE WINDOW IN UP POSITION, SHOWING A NEED TO HAVE THE HOLES SLOTTED TOWARDS THE REAR GUIDE
BULLDOGGIE



AFTER:
ARM TRACK UPPER BOLT HOLES AFTER SLOTTING. SLOTTED MOUNT HOLES FOR ALIGNMENT WITH THE WINDOW UP
BULLDOGGIE



SHOWS LOWER BOLT HOLES FOR THE ARM TRACK SLOTTED TOWARD THE REAR TO MATCH TO WINDOW TABS
BULLDOGGIE



REGULATOR ARM HELD TO GUIDE - RED ARROWS MARK THE BOLTS TO THE ARM TRACK WHERE I MIGHT ADD SOME SPACERS, IN THE UP POSITION IT SEEMS TOO FAR FROM THE GLASS
BULLDOGGIE



WINDOW UNBOLTED FROM ARM AND PUSHED FIRMLY INTO REAR GUIDE/TRACK.
BULLDOGGIE





WINDOW TAB REPAIRED WITH PLUMBERS EPOXY
BULLDOGGIE



.