Results 1 to 15 of 52

Thread: Air/Fuel Controller Installed

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    May 2009
    Location
    What VX? Rodeo Crew Cab, Jackaroo chassis, Supercharged 3.5, Navara tub (!!)
    Posts
    198
    Thanked: 0
    Bit more homework last nite. Gen 3 V8's have the right cam signal input, but the wrong crank angle wheel. Gen 4's have the right crank angle wheel but the wrong cam signal....!
    No doubt all this - like the number of O2 sensors to be read - can be turned on and off in software once access is gained
    I can send you the .bin file from the Isuzu ecu if your interested
    Last edited by Robbomaz : 04/12/2012 at 06:47 PM
    The answer is more power! What was the question?

  2. #2
    Member Since
    Feb 2010
    Location
    2001 VX 1320 -- Ebony
    Posts
    728
    Thanked: 19
    Quote Originally Posted by Robbomaz View Post
    Bit more homework last nite. Gen 3 V8's have the right cam signal input, but the wrong crank angle wheel. Gen 4's have the right crank angle wheel but the wrong cam signal....!
    No doubt all this - like the number of O2 sensors to be read - can be turned on and off in software once access is gained
    I can send you the .bin file from the Isuzu ecu if your interested
    I'd probably need a TunerPro mask to make any sense of it.
    2001 Ebony VX and 1989 Custom 383 Corvette

Similar Threads

  1. Heat dissipation for the transmission computer controller
    By Willievee in forum VX Modifications...
    Replies: 1
    Last Post: 03/15/2016, 03:18 PM
  2. VX Climate Controller
    By hankstrange in forum VX Troubleshooting...
    Replies: 8
    Last Post: 03/19/2012, 05:27 PM
  3. TOD controller - knob, wheel, or buttons?
    By mbeach in forum VX Modifications...
    Replies: 97
    Last Post: 10/06/2010, 08:50 PM
  4. Garage Door Controller
    By Joe Isuzu in forum VX Talk...
    Replies: 3
    Last Post: 09/27/2007, 03:32 PM
  5. AC controller display
    By gunpackingpoet in forum VX Troubleshooting...
    Replies: 1
    Last Post: 04/17/2007, 07:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails