Max, just to be clear, your craftsmanship look top of the line, and that custom computer is awesome! Sorry I assumed your entire brakelight housing was tinted, because honestly in the pictures that is what it looks like. The laws here in TX are far more strict I think. Here are the TX rules:

(d) A taillamp shall emit a red light plainly visible at a
distance of 1,000 feet from the rear of the vehicle.
(1) visible in normal sunlight at a distance of at
least 300 feet from the rear of the vehicle; and
(2) displayed when the vehicle service brake is
applied.

But I think the reflector one is the one that the LED brake light mod breaks, and I do not think I am compliant on this one:

§ 547.325. REFLECTORS REQUIRED. (a) Except as
provided by Subchapter F, a motor vehicle, trailer, semitrailer, or
pole trailer shall be equipped with at least two red reflectors on
the rear of the vehicle. A red reflector may be included as a part
of a taillamp
(b) A reflector shall be:
(1) mounted at a height from 15 to 60 inches; and
(2) visible at night at all distances:
(A) from 100 to 600 feet when directly in front of
lawful lower beams of headlamps; or
(B) from 100 to 350 feet when directly in front of
lawful upper beams of headlamps if the vehicle was manufactured or
assembled before January 1, 1972.

But once again I am glad you (and it seems like many others) are happy with the front skid and lights, they certainly look high quality, but I just hope your lights don't break due to "skidding" on something ;-)

Have you considered making a design with no lights?