I purchased the 2" red tunnel lights from towmart, here's the link:
http://www.towmart.com/2-inch-led-tunnel-light
I used 2" trucklite rubber grommets that I had on stock. But, you can get them at Napa.
I wanted the lights to be flush with the edge of the grommet so I had to cut out the little 1/4" nubs to let the light slide to the very bottom of the grommet. With the nubs intact it seated the light a 1/4" passed the face.
Then I used a 2.25" hole saw from lowes to cut the hole in the bumper cover after I removed the original reflectors.
I have another Vx to do this mod to and I'll a detailed "how to".
As far as reflectors in the front, there is only the round parking light which i'm replacing them with the 2.5" ambers.

Update on the skid plate.
I have two molds that will be finished tomarrow and will be ready to make the plates hopefully later this week "I have to goto the VA hospital thursday" if not, next week for sure.
The plates were made to accept "ONLY" 4" pilot lights and here's a link to see the different types they make and part numbers.
http://www.pilotautomotive.com/pdfs/..._lighting1.pdf
The ones I have are NV-361W. They have a chrome look when off and match the tunnel lights I installed.

So, now the price.
The kit will include the fiberglass skid plate that will be primed and ready to paint ,all stainless steel mounting hardware and your choice of lights installed with cables,relay and switch for $250.00.

If anyone is interested, PM and we can take it from there.