Question for the Sea Foamers

[JHarris1385]

Just did this myself.

+ Full can in gas tank
+ Half can in oil
+ Half can through vacuum connected to the brake booster
+ After it stalled, sprayed Deep Creep on the throttle plate.

SMOKED LIKE CRAZY...took a video of it, you could not see the house behind it.

[Mile High VX]

How and why do you use the Deep Creep product?

[Knigh7s]

Just did this myself.

+ Full can in gas tank
+ Half can in oil
+ Half can through vacuum connected to the brake booster
+ After it stalled, sprayed Deep Creep on the throttle plate.

SMOKED LIKE CRAZY...took a video of it, you could not see the house behind it.

That's exactly what I did. The entire house disappeared in the smoke!

How and why do you use the Deep Creep product?

I used SeaFoam Spray (not sure what the difference is with Deep Creep) to get a direct spray past the throttle valve, Stick the long straw into the throttle body past the valve put the intake hose back on, turn on car, rev to 1500-2000rpm and start spraying. turn off car and let sit. I guess this is a good way to get past the "dam" they were talking about in the earlier posts.

[Ldub]

How and why do you use the Deep Creep product?

well DUH...

Apparently, his nuts were too tight...

[WILLY]

well DUH...

Apparently, his nuts were too tight...

HA

[Otwobme]

i dont use that stuff, never had luck with it. with that being said i use BG products and have never ran into any issues with that... i live by that product in my shop.look up bg109 and MOA you have to use both.