Results 1 to 15 of 61

Thread: And so it begins...

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    Quote Originally Posted by jeeperkate View Post
    Things I want but are not going to happen in the next few months:
    - Rowhard skid panels F&R
    - Belly Skid plates
    FYI, rowhards plate's look great on the VX, but they offer no physical protection, they are made of fiberglass. a belly pan and sliders would be much better protection for the VX.... just my 2 cents...
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

  2. #2
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Quote Originally Posted by pbkid View Post
    FYI, rowhards plate's look great on the VX, but they offer no physical protection, they are made of fiberglass. a belly pan and sliders would be much better protection for the VX.... just my 2 cents...
    So far, the only "real" steel belly skids custom made for the VX are the ones from Kilby enterprises. We did a group buy about 2 yrs ago, and I believe I saw a post here fairly recently about getting another one going. (I'd have to search for that thread). The one issue some mentioned was we wish they'd counter-sunk some of the bolts, which you'll notice in one of the pics.

    Here's what they looked like NEW:













    and USED:



    ***

    *********





    VX KAT
    ....the adventure BEGINS ANEW! ...2015......
    Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.

  3. #3
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    Sue, do you have a car lift at home or do you hang out in the bay when your VX is at the mechanics? I see more pictures of your VX up in the air than anyone else.
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  4. #4
    Member Since
    Dec 2008
    Location
    Former owner 2001, Foxfire Red, #0663
    Posts
    7,311
    Thanked: 33
    Quote Originally Posted by MSHardeman View Post
    Sue, do you have a car lift at home or do you hang out in the bay when your VX is at the mechanics? I see more pictures of your VX up in the air than anyone else.

    Yeah Mark, we gotz us a lift right in the garage.........don't ya recall how much it took us to get just the pulley system installed in the garage so we can lift the roof rack & spare on/off ......j/k

    Yes, I take my camera every time I know something's going to be done on my underside...and my private mechanic shop lets me go in/under (even though I know his insurer would have a wee bit of an issue with that....
    that's how I got the CV boot pics too.

    remember my 3Cs.......cats, cameras, cars....my 3 fav subjects in the world!

  5. #5
    Member Since
    Jan 2012
    Location
    2001, Ebony Black, VX
    Posts
    180
    Thanked: 0
    Quote Originally Posted by pbkid View Post
    FYI, rowhards plate's look great on the VX, but they offer no physical protection, they are made of fiberglass. a belly pan and sliders would be much better protection for the VX.... just my 2 cents...

    Quote Originally Posted by VX KAT View Post
    So far, the only "real" steel belly skids custom made for the VX are the ones from Kilby enterprises. We did a group buy about 2 yrs ago, and I believe I saw a post here fairly recently about getting another one going. (I'd have to search for that thread). The one issue some mentioned was we wish they'd counter-sunk some of the bolts, which you'll notice in one of the pics.
    Thank you to both of you. I definitely just want the Rowhard plates for show and would love skids for the real offroad fun Not sure if I will go to full skids or not, really just depends on how I end up using the VX. I definitely want to try it out off-road, but I am just not sure how hard I want to play. If I do decide to play hard then I may just have my fab friend whip something up for me...it's so nice having a fab friend

    On another note, OME 913s were ORDERED today..YAY

    Nitto Trail Grapplers 285/65R18s were ORDERED and paid for today, however the shop is going to wait to bring them into stock until the VX is ready for them! Hopefully that won't be too long

    Next up - order SS brake lines and a whole lot of INSTALL...woot!
    '03 Honda CR-V (DD) - '05 Jeep Wrangler Rubicon - '01 Ebony VX!

    A smile is like tight underwear, it makes your cheeks go up!

  6. #6
    Member Since
    Jun 2010
    Location
    99, Silver, 1784
    Posts
    854
    Thanked: 0
    Quote Originally Posted by jeeperkate
    ...On another note, OME 913s were ORDERED today..YAY
    Excellent choice.

    Quote Originally Posted by jeeperkate
    Nitto Trail Grapplers 285/65R18s were ORDERED and paid for today, however the shop is going to wait to bring them into stock until the VX is ready for them! Hopefully that won't be too long
    Oooh, twins! If you stare half as much as I do after you get 'em, it's still twice as much as a "normal" person should. But I wish I could be there when you see them for the first time - before they even get mounted. If your reaction is anything like mine was, it's going to be

    Quote Originally Posted by jeeperkate
    Next up - order SS brake lines and a whole lot of INSTALL...woot!
    Get the brake lines, but also consider upgrading the calipers eventually. These tires are rather heavy.

    Great job gettin' it done so fast!
    -V
    -VI VX VNIVERSVM VIVVS VICI-

  7. #7
    Member Since
    Jan 2012
    Location
    2001, Ebony Black, VX
    Posts
    180
    Thanked: 0
    OME 913s in hand! Hopefully I can get those babies in tomorrow :-) Maybe even the rear shocks as well! YA!

    On another note, the Jeep is out of storage and is needing work as well. Now comes the fight over which vehicle gets upgraded/repaired first

Similar Threads

  1. Isuzu Impulse RS... another obsession begins.
    By VXorado in forum Chit-Chat ...
    Replies: 26
    Last Post: 04/03/2015, 04:58 PM
  2. VX Restoration Begins!
    By nfpgasmask in forum VX Talk...
    Replies: 25
    Last Post: 02/02/2012, 08:39 AM
  3. And so it begins...
    By Buffy in forum VX Talk...
    Replies: 138
    Last Post: 08/21/2011, 02:08 PM
  4. ...and so it begins!
    By alterastro in forum VX Modifications...
    Replies: 9
    Last Post: 06/19/2009, 02:58 AM
  5. and the silence begins...
    By ISCE in forum VX Talk...
    Replies: 10
    Last Post: 05/14/2008, 07:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails