Quote Originally Posted by deermagnet View Post
I would just hang on to the blower motor. If you have your VX for a long time, you'll probably need it or you could sell it to another member.

Take some measurements and then check JC Whitney or others for a generic A/C condenser fan assembly. It looks like you should be able to get at the fan without too much trouble with just the grille removed.


Here's how it works-


If you have no power to the fan, start at the A/C triple pressure switch-


Then move to the condenser fan relay-


Mark Griffin
Hey Mark-

Thanks for all the help it looks super informative. I'm gng to take this out to my drive way and see if I can't troubleshoot based off your notes and get my A/C working again.

However, I think the front bumper needs to be taken off. I removed the grill and removed the top two screws from the mount on the fan. The bottom two screws in the lower mounting were not too accessible. I could barely make contact by sticking the tool through an opening on the bumper but the opening didn't provide enough room to turn the tool and loosen the screws.

If I have to remove the front bumper, any suggestions?

Thanks, again for all the help.