Airflow Snorkel Installed

[LittleBeast]

Can you post some more pics of the install points around the door frame, I am more than likely going to pull the trigger on this mod asap, but I want to have a little more of an idea of how that area works.

Also please let me know what you figure out as far as under the hood, I have some ideas but I want to know what you come up with :-)

[VXorado]

Can you post some more pics of the install points around the door frame, I am more than likely going to pull the trigger on this mod asap, but I want to have a little more of an idea of how that area works.

Also please let me know what you figure out as far as under the hood, I have some ideas but I want to know what you come up with :-)

I took a pic with my phone & it was really hard to show the bracket so I'll explain. There is a fixed nut in the bottom of the snorkel for a frame bracket. The kit comes with a bracket (see S29 pic) which fixes the snorkel to the door frame. The bracket was a little big, so I cut the bottom section off, leaving only the long sliding bolt hole. Then I drilled a hole underneath the door weather strip, bent the metal and bolted the bracket to the VX and snorkel. When I finish the snorkel-intake install, I will bend the bracket a bit more so it doesn't push up the weatherstrip when the door is closed.





I ordered an Apollo intake last week for $85 ()... well $102 after shipping. Once I receive it, I'll finish the install and post more pics of the hose, intake, fender bolt mounts & bracket.