Quote Originally Posted by Ldub View Post
No, that's not what I meant...with the old carpenters method, there will be no gap anywhere...even if it takes more than one attempt...

Place the snorkel in it's desired location, have a second pair of hands hold it exactly there, dead solid.

Lay the marker on the fender flat, with the point in contact with the snorkl base, "draw" the contour of the fender cross section on the front & rear of the snorkl base, then cut/grind/sand everything outside the line...

Repeat until a perfect match is achieved...
...and wipe on some CF for good measure

Now I get ya, I thought you were just referring to the very front of the snorkel base. With some "" as you described the snorkel could fit perfectly. I was surprised how well the weatherstrip worked and was happy to throw my hands up and call "done" on this project. Oye mate, cheers.