It does look quite intimidating, doesn't it.
But to me it also imparts a distinctly "street" feel to the front end. Very slick and not quite in balance with the more off-pavement look I'm attempting to achieve.
Closing out my own request in this thread, I was able to get the measurements (roughly, but close enough to count) of those sockets. I'm going to replace the OEM lamps and housings with a pair of true fog lamps.
(The ones I've purchased are the 80mm 55W H3 Halogen DE Series from Hella.) I plan to disconnect them from the lighting controls on the stalk, and wire them to an Isuzu OEM fog lamp switch to be placed in the fuzzy
hole blank plate I acquired last year. The other two switch location will also sport OEM fog switches - already acquired - to control two banks of auxiliary lighting: a pair of driver beams mounted to the safari bar, and four
on the roof - a pair of spots at the inboard position and a pair of floods at the outboard position.
I love it when a plan comes together. When it begins, I'll be sure to document everything in a fresh thread.
-V
Reply With Quote