The wheels I've used with good success are from a Nissan Frontier and are 15". You have to remove about 1/16" to 1/8" off the inner wheel lip to clear the front A-arms, the rears are no problem. The first rally with these I didn't know this and my front wheels were loose after first run, tightened them up and no problems, found out after putting street wheels back on the A-arms did the milling for me! There's a lot of good tire choices in 15" as well but the weight of the VX is very hard on tires with poor sidewalls so look for actual rally tires. When I'm done with the Ebony Rally Beast (someday!) I plan to use 15" forklift tires. They're inexpensive, start at about 12-play and are easily siped, grooved and studded to your hearts content. And they've got sidewall to spare!

I've cleaned out my PM box so if any questions shoot me your email and I'll answer as best I can.