Valve cover torque setting

[p_justin13]

Does anyone know proper torque for the studs on the valve cover don't want to smash the little metal washers on the darn thing I know the intake was 13 ft lbs but not sure if just semi hand tight or if there was a recommended setting for them. Thanks. Also can someone post the number for Merlin at isuzu need to order some other parts and can't find it on the search. Thanks again.

[Ebenezr]

35.4 lb in. those aren't foot lbs. From the manual. Not sure how to convert maybe divide by 12

[Jonnie]

http://www.vehicross.info/forums/sho...30&postcount=4

http://www.onlineconversion.com/torque.htm

[Ebenezr]

http://www.vehicross.info/forums/sho...30&postcount=4

http://www.onlineconversion.com/torque.htm

Jonnie: this link is for head bolts..the original question was the little hex head valve cover bolts. actually im wrong those are the bolts the hold the cams

[Jonnie]

Here's the rest fo the thread:

http://www.vehicross.info/forums/sho...630#post234630