Anyone Making skid plates and rock sliders?

[VX KAT]

Here's a pic of the Rocky Road Supersliders for the VX.



Here's some pics of the ends of my supersliders, can see where they end.











http://www.rocky-road.com/vxrockrail.html
Also on Rocky Road's website, they show "Zeus"s VX with them installed.











Might even rekin-eyze this feller's ride...he's also on their website for his suspension (those aren't RR sliders):

[JoFotoz]

Seems that maybe with all the pics Billy & Kat put up, plus the ones from my gallery...

...you may have all the "food for thought" ya need.

I have a 1.25 inch square tube running along the seam..
..and 4.5 x 1.5 'girder' ( ) under outboard edge..sticking out about 2 inches.

Tube and girder are joined at 3 points with 1.25 tube..
...and the whole assembly is welded to frame in 3 places
with gusseted 1.25 tube.

I would think an additional step hoop welded to the outside edge ( of girder, or tube rail as on Kats )
and angled up as much as possible for clearance would provide a solution for both you and your better half desires!

I'll get other pics of mine if you need them...just let me know.

jo