Results 1 to 15 of 75

Thread: rear bump stops

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jul 2004
    Location
    2000, Kaiser Silver, 0196
    Posts
    497
    Thanked: 0
    Quote Originally Posted by Ldub View Post
    I'm not say'n that high psi is bad or dangerous, as long as you are satisfied with the wear etc, go for it.
    It's the misconception of the max press on the sidewall being mistaken for a recommendation that I disagree with...

    Well I'll say it then. It's dangerous!

    Example: max recommended pressure on my TerraGrapplers is 50psi. At that pressure there would be about 42% less rubber in contact with the road than what Isuzu intended, which will significantly increase stopping distance - and reduce lateral grip as well. Unless you're hauling a lot of weight, for safety's sake you might want to air down a little! Who knows - it might keep you from rear-ending somebody on the freeway someday. And BTW, 29psi is specified as cold - so pressure increase according to the Ideal Gas Law is already accounted for.

  2. #2
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    Quote Originally Posted by SlowPro48 View Post
    Well I'll say it then. It's dangerous!

    Example: max recommended pressure on my TerraGrapplers is 50psi. At that pressure there would be about 42% less rubber in contact with the road than what Isuzu intended, which will significantly increase stopping distance - and reduce lateral grip as well. Unless you're hauling a lot of weight, for safety's sake you might want to air down a little! Who knows - it might keep you from rear-ending somebody on the freeway someday. And BTW, 29psi is specified as cold - so pressure increase according to the Ideal Gas Law is already accounted for.
    I'm gonna agree to disagree with this statement. sure at rolling speed, you lose an amount of rubber contact with the road as the tires expand in the middle of the tread, but what happens when you press those brakes hard and the weight of the vehicle is thrown onto the front tires? you then have 100% contact and have regular tire grip.
    Lets see if i can word this to make sense as it does in my head
    As well, if we are talking safety, which is my point for inflating my tires so high; if you have your tires at lower pressure, say 29 psi as your door jam suggests, how is your vehicle supposed to handle in a panic skid or quick swerve? My reasoning is, as your sidewall gives, it causes body roll, increasing chance of a rollover. I personally would rather skid a little (key word little), than have the tires grab hard and roll me over.
    Now, this also supports my thought behind hard straight line braking, if you swerve and put the weight of the vehicle on 2 tires, you now are operating at optimal traction levels (enough to skid but also handle). Rather, at low tire pressure you increase your traction to a level of rollover or poor handling (low tire pressure proves to make for sloppy handling).

    Let the bashing and arguments begin
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

Similar Threads

  1. Rear bump stops -- optional or necessary?
    By 89Vette in forum VX Talk...
    Replies: 44
    Last Post: 02/17/2013, 03:08 PM
  2. Bump stops
    By SouthJ1 in forum VX Talk...
    Replies: 52
    Last Post: 09/13/2012, 03:29 PM
  3. Bump Stops (again)
    By etlsport in forum VX Modifications...
    Replies: 3
    Last Post: 03/03/2011, 02:00 PM
  4. Bump Stops
    By JAMAS in forum VX Talk...
    Replies: 41
    Last Post: 04/15/2009, 06:02 PM
  5. Rear Bump-stops
    By kelvin in forum VX Troubleshooting...
    Replies: 9
    Last Post: 05/31/2007, 02:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails