Results 1 to 8 of 8

Thread: question for the seat extenders

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Aug 2003
    Location
    2001, Dragon Green #0891 [retired ;_;]
    Posts
    303
    Thanked: 0
    Ok, so I bought my vx about a month ago and when I first got it I wasn't to sure what to look for as "standard". Over the course of the first two weeks most of the people that sat in my front seat commented that it sat really high up and forward. I didn't really pay much attention to this since I never sat in it. While meeting up with Jamie, another vx owner here, he mentioned that my seat was sitting way higher then his, so when we took a look at it, it turned out I had custom passenger seat extenders. I removed them last week, because I'm more likly to have people in the front seat on long trips then to have people frequently getting in and out. So I figured I'd rather have the front passenger more comfortable.

    These are nothing like what some of the other guys on the board have been offering, I've noticed the ones on the board are 2 seperate pieces that you then bolt seperatly to the truck. The ones I have are 1/4 inch solid steel bars. They bolt in 4 places per bar, 2 bolts directly into the stock bolt receivers and then 2 bolts attach the seat to the extenders. It lifts the seat about 1/2 inch and moves it forward by about 3 to 4 inches.

    One thing to note, installation of these is very simple since they are a single piece bracket.

    1. Simply unbolt the seat from the vx.
    2. slide the brackets under the seat frame
    3. bolt the brackets to the vx.
    4. bolt the seat to the brackets.

    There is no need to remove the seat or anything like that. I was actually able to uninstall them in less then 15 minutes. Took some extra time just to see if I liked the seat lower or higher.

    Now, I'm not willing to sell these, because i never know when/if I'll actually need them. But, if somone wants to use them as prototypes to make new ones I have no problem with that as long as I get them back.

    I dont know, maybe somone like Tone or Ron could use them to start producing them and offering them in their respective stores.

    (Note: I have pics of them, but as soon as I took the last pic my camera battery went dead. I'll post the pics here as soon as my battery recharges)
    Last edited by omegavx : 09/25/2003 at 10:31 PM

Similar Threads

  1. Survey of Interest in Seat Extenders
    By JAMAS in forum VX Talk...
    Replies: 54
    Last Post: 11/11/2009, 04:29 AM
  2. Seat Extenders?!!?
    By galvinsc in forum VX Modifications...
    Replies: 11
    Last Post: 10/18/2009, 02:27 PM
  3. Folding seat Question
    By moki in forum VX Troubleshooting...
    Replies: 9
    Last Post: 01/14/2005, 10:23 AM
  4. 4.50" Passenger Seat Extension Kit question
    By zzzyang in forum VX Talk...
    Replies: 5
    Last Post: 03/26/2004, 12:14 PM
  5. brackets/seat extenders installed
    By edyavno in forum VX Modifications...
    Replies: 2
    Last Post: 03/24/2003, 08:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails