Results 1 to 5 of 5

Thread: Rancho shock question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2010
    Location
    2000 Proton VX 0630
    Posts
    385
    Thanked: 0
    If you look on the body of the shock, you can see a triangle pointing down at the adjuster.... that's what I went by.
    [SIGPIC][/SIGPIC]

  2. #2
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    The setting is whatever is showing at the 12:00 position. You turn it all the way clockwise to get to nine. The one and nine are indicated by the same notch as you saw. The five and seven are clearly seen, so as you turn clockwise you will go from five to seven and then nine. If you are still unsure, turn it all the way counter clockwise to one. Your front end should bounce pretty easily by pressing down on one corner. Then turn it all the way clockwise to nine and it should be much stiffer and harder to bounce. The difference will be dramatic between one and nine.

    Mark Griffin

Similar Threads

  1. Rancho RS9000XL shock install
    By vxcp in forum VX Troubleshooting...
    Replies: 4
    Last Post: 05/18/2016, 01:33 PM
  2. Shock Question OME or Rancho
    By Ala5ka in forum VX Modifications...
    Replies: 8
    Last Post: 06/29/2014, 01:59 PM
  3. Shock absorbers Rancho 9000's?
    By David Wiltshire in forum VX Talk...
    Replies: 8
    Last Post: 08/12/2013, 05:37 AM
  4. Shock Extenders or Rancho 9000's?
    By GPA in forum VX Modifications...
    Replies: 13
    Last Post: 08/09/2013, 06:27 PM
  5. Rancho 9000 shock question
    By AndyC in forum VX Troubleshooting...
    Replies: 13
    Last Post: 12/21/2005, 11:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails