Warn hub install

[vt_maverick]

Here's a (potentially dumb) question: My Borbets have a cover that goes over the lug nuts - will these interfere? If so that's probably a show stopper for me...

[nfpgasmask]

Here's a (potentially dumb) question: My Borbets have a cover that goes over the lug nuts - will these interfere? If so that's probably a show stopper for me...

You mean a center cap that covers the lug nuts AND the hub (center of the wheel)? I would say most likey it would get in the way. If I installed manual hubs on my VX, I would just need to get rid of my center caps.

Bart

[tom4bren]

You mean a center cap that covers the lug nuts AND the hub (center of the wheel)? I would say most likey it would get in the way. If I installed manual hubs on my VX, I would just need to get rid of my center caps.

Bart

Potentially, you could modify the center caps with a cut out to access the disconnect. Not sure you're ready to take a knife to the borbets though.

[vt_maverick]

Potentially, you could modify the center caps with a cut out to access the disconnect. Not sure you're ready to take a knife to the borbets though.

I wouldn't mind removing the covers (only two allen bolts) when I want to access them. My concern is that I'd have to make cuts just to fit them behind the covers (which is NOT an option ).

[tom4bren]

I wouldn't mind removing the covers (only two allen bolts) when I want to access them. My concern is that I'd have to make cuts just to fit them behind the covers (which is NOT an option ).

We can fit check one of your Borbets on mine if you like.

[tom4bren]

OK, here are the External Clip rings that I got from Fastenal:

Here are the hubs after installation:

[tom4bren]

BTW, the 3 'extras' that I have are free to anyone who wants them. Just PM me where you want them sent.

Never did figure out why they come in packages of 5. Who would ever need an odd number???