welder

[Bob Barker]

So I want to get a welder, one that I can use at home. I don't know how to weld, but have a buddy that can and will teach me as we go along. So who here that has one at home, what would you recommend for me to look for? I'll most likely be looking for something used locally. I'll be using it for small projects on my SVO and things like bumpers or sliders or diff brackets on the VX. NOTHING heavy duty! Just a little shade tree mechanic size will do just fine!

[Bob Barker]

http://orlando.craigslist.org/tls/2377184139.html

is that a good one for what I want to do? Simple enough to use and strong enough to melt metal with other metal?!

[BOARZHEAD]

We call that a buzz box. Its not what you want. You can get a new one for 300$ with 2 year warrenty.

http://www.homedepot.com/webapp/wcs/...atalogId=10053

http://orlando.craigslist.org/tls/2377184139.html

is that a good one for what I want to do? Simple enough to use and strong enough to melt metal with other metal?!

[etlsport]

I have this craftsman mig welder

http://m.sears.com/productdetails.do...r=00920569000P

It is a good starter welder, but as you get better you can expand it as it is gas or gasless. Comes with a nice cart and a joke of a mask

I'm no professional but have made some nice things with it including a gas grille and my light bar for the vx

[jmayer40]

Mig is so much easier than stick. Arc, you have to find proper stick and range. Mig point and burn away..

[Bob Barker]

So mig... but what about price?

[etlsport]

the craftsman i have i think retails around 500... i found a screaming deal on it and got one new in box for 45 but that was a fluke, when it goes on sale its usually around 400-450

[VX KAT]

Travelin2 had a portable welder that attached to a vehicle, for welds on the trail. He had it listed on ebay a few times, but I don't think it sold. Maybe contact him and see if he still has it.

[Triathlete]

Sue, those are made by Holbart and are great for trail fixes but far from ideal for any serious welding projects.
On that note, for trail fixes you can weld with a pair of jumper cables, two batteries and some welding stick...it ain't pretty but it gets the job done.

[jmayer40]

Check out Harbor Freight, I think Walmart sells cheaper one for around 250.00 .. they are good starter.

[RamAirZ]

I like the Lincoln 135amp welder I've been using, they sell them in the 140amp version now. My buddy found his at a pawn shop for $150 and it has a hook-up for gas

[BOARZHEAD]

harbor freight has a flux core for 99$ good for small projects but thats it. Invest in a good mig machine like miller or lincoln. As for stick welding once you get the hang of it its great. Mig is easier but to constantly run gas and wire starts to eat up wallet.

[newthings]

HI,
I weld and have a small Miller MIG. I also volunteer at the USCG shop doing metal fab. The difference between little welders at their max and a 250 amp machine is great. It is hard to go back.
I suggest you invest a bit in yourself first. Find a junior college with a welding program and do a semester or two. They may have a special program to train users doing just what you want to do with a small machine.
Then, decide how into welding you want to go. Used professional machines are available. Check in with your local Miller sales shop for demos and returns.
Good luck, Roy

[tjh]

HI,
I weld and have a small Miller MIG. I also volunteer at the USCG shop doing metal fab. The difference between little welders at their max and a 250 amp machine is great. It is hard to go back.
I suggest you invest a bit in yourself first. Find a junior college with a welding program and do a semester or two. They may have a special program to train users doing just what you want to do with a small machine.
Then, decide how into welding you want to go. Used professional machines are available. Check in with your local Miller sales shop for demos and returns.
Good luck, Roy

Great advice!

[Scott Larson]

I bought a Solar mig welder years ago for $400.00 and it has done everything I've ever needed it to. It's a 110/220 volt 225 amp gas mig that uses a tank of argon gas for shielding. So much better then a flux core IMHO. Also, stick welders are great if all you plan to weld is heavy gauge steel; but if you plan on doing any sheetmetal work, mig or tig is the best way to go as they can weld both, to 1/4" and beyond. Mig is also the easiest to learn and use while tig is the hardest. They all take a little patience and practice, but it comes pretty quickly. Best of luck!