Originally Posted by RICHARD PAYNE
X-2....
When I did mine, I cut holes in the headliner (which would be covered by the overhead) big enough to get my fingers through. Then glued 2" pieces of 1/4" plywood to the top side of the headliner, above where the mounting points are.
A much easier alternative to removing the whole headliner for those contemplating this mod.
I also used the guts of the original dome light, & wired it so the map lights dimmed down with the dome light when the door is closed.
http://www.vehicross.info/gallery/da...0OHconsole.JPG
http://www.vehicross.info/gallery/data/500/DSC04095.JPG
http://www.vehicross.info/gallery/data/500/DSC04098.JPG
Reply With Quote