Hidden front 2" receiver/winch mount

[BigMeatVX]

Finally got it done....

Hidden 2" receiver/winch mount...

Pics are here
http://www.vehicross.info/gallery/sh...php?photo=2501
http://www.vehicross.info/gallery/sh...php?photo=2503
http://www.vehicross.info/gallery/sh...php?photo=2502

sides are made from 3/16" steel
center is made from 2-1/2" 1/4"square steel
The receiver is flush with the front cladding and can be hidden by the front plate.

Aside from being able to use the receiver to add a bike rack, front carrier, hitch, or any other gaget to fit the receiver, you can use a winch with a 2" receiver mount. (on the rear too if you have the rear hitch)

This gives you the option to bring the winch along for the 4x4 adventures or leave it in the garage for the road trips

Also, in the future, I may make/sell a tube bumper that uses the 2" receiver as a mount (removable) and has a receiver extension to still allow the use of the 2" receiver

I had 10 extra sets made just in case anyone here was interested...
Finished cost is $150 + shipping

for those that have access to a welder, unfinished/unwelded kit would cost $75 +shipping

e-mail me if interested...

Allan